Float switch
A float switch is a type of level sensor, a device used to detect the level of liquid within a tank. The switch may be used to control a pump, as an indicator, an alarm, or to control other devices.
One type of float switch uses a mercury switch inside a hinged float. Another common type is a float that raises a rod to actuate a microswitch. One pattern uses a reed switch mounted in a tube; a float, containing a magnet, surrounds the tube and is guided by it. When the float raises the magnet to the reed switch, it closes. Several reeds can be mounted in the tube for different level indications by one assembly.[1]
- Opened float switch from a sump pump
- float switch on
- float switch off
A very common application is in sump pumps and condensate pumps where the switch detects the rising level of liquid in the sump or tank and energizes an electrical pump which then pumps liquid out until the level of the liquid has been substantially reduced, at which point the pump is switched off again. Float switches are often adjustable and can include substantial hysteresis. That is, the switch's "turn on" point may be much higher than the "shut off" point. This minimizes the on-off cycling of the associated pump.[2]
Some float switches contain a two-stage switch. As liquid rises to the trigger point of the first stage, the associated pump is activated. If the liquid continues to rise (perhaps because the pump has failed or its discharge is blocked), the second stage will be triggered. This stage may switch off the source of the liquid being pumped, trigger an alarm, or both.[3]
Where level must be sensed inside a pressurized vessel, often a magnet is used to couple the motion of the float to a switch located outside the pressurized volume. In some cases, a rod through a stuffing box can be used to operate a switch, but this creates high drag and has a potential for leakage. Successful float switch installations minimize the opportunity for accumulation of dirt on the float that would impede its motion. Float switch materials are selected to resist the deleterious effects of corrosive process liquids. In some systems, a properly selected and sized float can be used to sense the interface level between two liquids of different density.[1]
See also
- Float (liquid level)
- Fuel gauge
- Level sensor
- Sight glass
References
- ^ a b Bela G. Liptak (ed.), Instrument Engineers' Handbook, Fourth Edition, Volume One: Process Measurement and Analysis, CRC Press, 2003,ISBN 1420064029 page 477
- ^ Stephen Herman, Understanding Motor Controls, Nelson Education, 2012, ISBN 1133713912, pp. 163-165
- ^ Kietzman, Shannon (26 September 2022). "What is a Level Switch?". About Mechanics. Retrieved 2022-10-28.
- v
- t
- e
- Analogue switch
- Banyan switch
- Battery isolator
- Cam switch
- Centrifugal switch
- Company switch
- Contact protection
- Crossbar switch
- Crossover switch
- Cryotron
- DIP switch
- Dry contact
- Electric switchboard
- Float switch
- Half-moon switch
- Humidistat
- Infinite switch
- Inertial switch
- Kill switch
- Key switch
- Knife switch
- Limit switch
- Latching switch
- Light switch
- Lightning switch
- Magnetic proximity fuze
- Magnetic starter
- Magnetic switch
- Mercury switch
- Miniature snap-action switch
- Motion-triggered contact insufficiency
- Optical switch
- Photoswitch
- Piezo switch
- Placebo button
- Pull switch
- Push switch
- Push-button
- Railroad switch
- Reed switch
- Rotary switch
- Sail switch
- Sea switch
- Sense switch
- Silicone rubber keypad
- Softswitch
- Spark gap
- Staircase timer
- Stepping switch
- Strowger switch
- Thermostat
- Time switch
- Touch switch
- Transfer switch
- Vacuum switch
- Vandal-resistant switch
- Wireless light switch
- Zero speed switch
This technology-related article is a stub. You can help Wikipedia by expanding it. |
- v
- t
- e